Peripheral HardwareΒΆ
This section groups hardware that may (or may not be) present on your frame, including rangefinders, camera mounts, telemetry radios etc. For information related to Autopilot selection see Autopilot Hardware Options.
Note
If using the Mission Planner, many of these sensors can be set-up from the Initial Setup >> Optional Hardware screens
- Airspeed Sensor
- AIS (Automatic Identification System)
- Barometer (external)
- BlackBox Logger using an AutoPilot
- Button Inputs
- Buzzer
- Cameras & Gimbals
- Companion Computers
- Display (Onboard)
- ESCs and Motors
- External AHRS Systems
- DroneCAN Adapter Node
- DroneCAN Peripherals
- Ethernet Adapters
- First Person View Video
- Fuel Flow and Level Sensors
- Generators
- GPS/Compass
- Grippers
- Joystick or Gamepad
- LEDs (external)
- Non-GPS navigation
- On-Screen Display (OSD)
- Optical Flow Sensor
- Power Modules
- Power Tether
- PPM Encoder
- Radio Control Systems
- Rangefinders (Sonar, Lidar, Depth Cameras)
- Received Signal Strength Indication (RSSI)
- Relay Switch
- Remote Id (aka Drone Id)
- RPM Sensor
- Safety Switch
- Servos
- Smart Batteries
- Start/Stop Switch
- Telemetry Radio
- Temperature Sensors
- Video (High Definition)
- Winch
- Wind Vane
- Wheel Encoders