Hexsoon EDU-450¶

The Hexsoon EDU-450 is a relatively low cost frame including motors, ESCs and propellers

This frame is available from many CubePilot retailers

Hexsoon’s EDU-450 specfications can be found here

Box Contents¶

4x Motors HS2216 920KV
4x Propellers T-MOTOR T1045II
4xESCs Hexsoon 20A
Landing Gear
Power Distribution Board

Additional Required Parts¶

Cube autopilot or any other ArduPilot compatible autopilot
3300mAh to 5300mAh 3S battery
RC transmitter with at least 6 channels like the Futaba T10J

Connection and Setup¶

../_images/refrence-frames-hexsoon-edu450-assembly.jpg

Connect the four ESC wires to the back of the autopilot as shown in the QuadX configuration

Parameter file: hexsoon-edu450.param

This parameter file can also be loaded using the Mission Planner’s Config/Tuning >> Full Parameter Tree page by selecting “hexsoon-edu450” from the drop down on the middle right and then push the “Load Presaved” button.